Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb of the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Tail light bulb

To replace the rear light bulb on the Fiat Panda, open the tailgate to access the screws securing the light unit. These screws are located at the top and bottom of the light. After loosening the bolts, you can pull the light out from its housing and remove the screws fixing the plate inside, after disconnecting the connector. The affected bulb can now be removed from the plate and replaced with a new one, securing it back to the light and reinstalling the light into its housing.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Fiat Panda 3
How to replace the rear headlight bulb of the Fiat Panda 3
Fiat Panda (2012-2023 / ) If you own a Fiat Panda Mk3 and want to replace the bulb of one of the rear lights on your own, all you have to do is carefully read and follow the f…
How to replace the rear light bulb of the Fiat Panda 3
How to replace the rear light bulb of the Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) To quickly and safely replace the rear headlight bulb of your Fiat Panda third series, you need to follow all the steps described in this new guide. …
How to Replace the Rear Light Bulb on a Fiat Panda?
How to Replace the Rear Light Bulb on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear light bulb on a Fiat Panda, open the boot to access the two bolts located between the seal and the light. Once these are loosened…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos