Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to reset the engine failure warning light on the Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Thermostat
Operation: How to reset the engine failure warning light on the Fiat Panda

If the yellow engine failure warning light comes on on the instrument panel and at the same time the water temperature practically goes to zero, the problem could be with the thermostat or with the temperature probe, so to cancel this, this alarm must be replaced. the thermostat and for safety also the temperature probe. To access the thermostat it is necessary to disassemble the engine cover and the air filter, the temperature probe and the thermostat are located on the right side of the engine and after having disassembled the coil group we can access them for disassembly. To release the thermostat afterwards, the hose clamp of the water pipe must be removed.


Posted on 6 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2003-2012 - How much does it cost to replace the thermostat in a Fiat Panda 1.2? Read Answer
    • Panda 2003-2012 - Where is the thermostatic valve of the 2003 Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does the Fiat Panda thermostat cost? Read Answer
    • Panda 2003-2012 - What is the price of the thermostat for the Fiat Panda 1300 Multijet? Read Answer
    • Panda 2012-2021 - How much does it cost to replace the thermostat in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does the thermostat cost for the Fiat Panda? Read Answer
    • Panda 2003-2012 - What is the price of the thermostat for a Fiat Panda? Read Answer
    • Panda 2012-2023 - How much does the thermostat cost in the Fiat Panda 1.3 Multijet? Read Answer
    • Panda 2012-2023 - How much does it cost to replace the thermostat on a Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does the Fiat Panda thermostat cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos