Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument cluster in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Instrument cluster

As we can see in this tutorial, removing the instrument cluster in a Fiat 500 is an extremely simple and fast operation. First of all, let's make sure that the key is not inserted in order to operate safely, then identify the two screws located under the steering column cover and, using a cross-tip screwdriver, unscrew them both. Once both the lower and upper covers have been removed, we continue by disassembling the picture frame with a Torx T10 key and finally the picture itself with a T20 key. At this point all that remains is to extract the module from the dashboard, disconnect the connectors and fit any spare part.

Posted on 23 February 2023 by ScegliAuto

Video tutorial

Related tutorials

Tire reset on Fiat 500
Tire reset on Fiat 500
Fiat 500 (2012-2023 / 500 L) Tire reset on a Fiat 500? Let's see how to reset the spy. We turn on the instrument panel of the Fiat 500 with the key, we turn on the instrument pan…
Disassembly of the instrument panel of the Fiat 500 X
Disassembly of the instrument panel of the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Let's see in this video how to remove the instrument panel and the dashboard fairing of the Fiat 500 X, following the instructions below. First of al…
Disassembly of the Fiat 500 Abarth instrument panel
Disassembly of the Fiat 500 Abarth instrument panel
Fiat 500 (2007-2021 / 312) In today's video we will see the steps to be able to remove the instrument panel of a Fiat 500 and 500 Abarth. First we get inside the car and begin …

Other guides you may be interested in

Replacing Brake Pads on the Moto Guzzi V7

To replace the brake pads on the Moto Guzzi V7, first position the bike on a stable stand on a flat surface. Once done, start by removing the old brake pads from the front brake by simply removing the two springs that secure the pins of the pads (the pins, in turn, secure the brake pads in their housing within the brake block mounted on the wheel). Now, extract the pads from their housing and replace them with new ones. Reassemble everything by following the same steps in reverse. For replacing the brake pads on the rear wheel, once you locate the brake block, unscrew the two bolts using a suitable spanner to access the pads, which can be easily replaced. Reassemble everything and you're done!

Watch the video!


by ScegliAuto

More videos