Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Brake Pads on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

In this video tutorial, learn how to replace the front brake pads on a Fiat 500. First, lift the car and remove the front wheel. Now, rotate the entire brake assembly towards you for easier access during the replacement.

Insert a flat screwdriver into the slot at the front of the caliper and lever it to retract the brake piston. Next, remove the retaining pin from the caliper, followed by the caliper itself.

Now you can lift the brake caliper and replace both pads. Follow the procedure in reverse to reassemble everything.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Change Brake Pads on a Fiat 500
How to Change Brake Pads on a Fiat 500
Fiat 500 (2007-2021 / 312) How do you change the brake pads on a Fiat 500? Let's see how to remove the front brake pads of the car. Lift the car on a column lift, stopping at a…
Replacing Rear Brake Discs and Pads on a Fiat 500
Replacing Rear Brake Discs and Pads on a Fiat 500
Fiat 500 (2007-2021 / 312) In today’s video tutorial, you will find all the instructions and steps to disassemble and replace the rear brake discs and pads on a Fiat 500. First…
Replacing the Front Brake Pads on the Fiat 500
Replacing the Front Brake Pads on the Fiat 500
Fiat 500 (2007-2024 / 312) This guide will show you how to remove and replace the front brake pads on the Fiat 500. First, lift the vehicle and start by removing the front whee…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos