Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Horn Button on a Classic Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Checks and maintenance

See other generations:
Video tutorial

This involves using the horn button from a Fiat 850 on a Fiat 500; it is an aftermarket accessory, meaning it is not original but compatible. As you can see, the entire button is disassembled and reassembled inside the steering wheel of the Fiat 500 - the parts are few and very easy to reassemble as shown in the video - the most complicated part is perhaps the spring that goes behind and must hold all the pieces, requiring a bit of skill.

Reassembling it on a light-coloured steering wheel will create a really nice effect. You can easily find these parts on major e-commerce platforms.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Refit the Engine on the Classic Fiat 500
How to Refit the Engine on the Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In this tutorial, you will find the instructions to refit the entire engine block onto the body of the classic Fiat 500. First, open the rear bonnet …
How to Adjust the Idle Speed of the Classic Fiat 500
How to Adjust the Idle Speed of the Classic Fiat 500
Fiat 500 (2007-2024 / 312) Today's guide shows you the steps to adjust the idle speed of the classic Fiat 500. First, open the bonnet and locate the throttle cable adjuster at …
How to Remove the Engine from the Classic Fiat 500
How to Remove the Engine from the Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In today's video tutorial, you will see the main steps needed to remove the engine from the body of the Classic Fiat 500. First, open the rear bonnet…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos