Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Video Guide on How to Remove the Gearbox

Model: Fiat Panda MK 1, 141 - Years 1980-2003
Part: Transmission

This guide illustrates how to proceed with the removal of the gearbox.
First, lift the car and place it on stable axle stands to avoid serious injuries. Disconnect the clutch cable and start unscrewing the bolts that secure the gearbox to the engine block.
Lower the transmission and check that all gears are in good condition.
The operations are interrupted by a downpour, but once the good condition is verified and any damaged gears are replaced, it is possible to reassemble everything.

This way, you can perform maintenance on the gearbox of your Fiat Panda.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide on How to Remove the Propshaft and Gearbox
Fiat Panda (1980-2003 / MK 1, 141) The narrator explains the investigations carried out following the vibrations and jolts experienced during driving and confirms, after a thorough che…
Replace gearshift gaiter on Fiat Panda
Replace gearshift gaiter on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replacing the gearshift gaiter on Fiat Panda? Let's see how the damaged headset is removed from above the shift rod. Remove the knob from the shift r…
How to replace the gearbox oil on Fiat Panda
How to replace the gearbox oil on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This guide shows how to replace the gearbox oil on a Fiat Panda: position your car on a column lift or jack and raise it to a comfortable height for …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - What to do if the gearbox is noisy in the Fiat Panda? Read answer

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos