Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Fiat Siena

Model: Fiat Siena MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight bulb

Video tutorial

If you need to replace a headlight bulb on this car model, the description below contains all the necessary information and steps to proceed with the replacement. First, open the hood and locate the headlight where the bulb needs to be replaced.

Release the steel hook that secures the rear cover and remove it. Inside the headlight, you will find the power connector that needs to be disconnected, then release the bulb clip and remove it to replace it with the new one. Finally, close the retaining clip, reconnect the connector, and replace the cover.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

Replacing Low Beam Headlight Bulb on Fiat Siena
Replacing Low Beam Headlight Bulb on Fiat Siena
Fiat Siena (1996-2017 / MK 1) Learn how to replace the low beam headlight bulb on your Fiat Siena if it has burned out. Open the hood and stand in front of the affected headlight.…
How to Replace a Headlight Bulb on a Fiat Siena
How to Replace a Headlight Bulb on a Fiat Siena
Fiat Siena (1996-2017 / MK 1) If you need to replace a burnt-out bulb in your vehicle, follow these steps: open the hood and locate the headlight with the burnt bulb. Behind the h…
Where is the fuse box located in the cabin of the Fiat Siena?
Where is the fuse box located in the cabin of the Fiat Siena?
Fiat Siena (1996-2017 / MK 1) If you own a Fiat Siena and want to find out where the interior fuse box is located, just read the following guide and follow the described procedure…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos