Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Fiat Talento

Model: Fiat Talento MK 1 - Years 2016-2021
Part: Tire pressure warning light

When the low tyre pressure warning light comes on in this vehicle model, you must immediately check for any punctures and, if necessary, restore the recommended inflation pressures set by the manufacturer. After that, you will need to reset the warning light present on the instrument panel. In the description below, you will find the necessary indications and steps to follow. Turn on the ignition, press the SET button on the left side of the steering wheel and hold it down. This will turn off the service light.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance light on the Fiat Talento
How to reset the maintenance light on the Fiat Talento
Fiat Talento (2016-2021 / MK 1) If the maintenance light on your Fiat Talento's instrument panel continues to remain on even after performing the service, don't worry because you ca…
How to Reset the Service Light on the Fiat Talento?
How to Reset the Service Light on the Fiat Talento?
Fiat Talento (2016-2021 / MK 1) To reset the Service light on the Fiat Talento, turn on the instrument panel and navigate through the menu until you reach the "Trip" option. Here, p…
How to reset the service light on the Fiat Talento.
How to reset the service light on the Fiat Talento.
Fiat Talento (2016-2021 / MK 1) To reset the service light on a Fiat Talento - after completing the services required by the service interval - get into the van, close the doors, an…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos