Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : Where are the fuses located in the Fiat Doblò?

Fiat Doblo - Video tutorial

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Fuse box
Operation: Where are the fuses located in the Fiat Doblò?

Inside the Fiat Doblò, all fuses are divided into appropriate fuse boxes that are present in the vehicle: these are located inside the cabin and inside the engine compartment. The first one is positioned inside the dashboard, in the bottom left part compared to the steering column: this contains fuses that are responsible for the operation of the instrument panel, courtesy lights, power windows, etc. The second box will instead be found on the right side of the engine block: it contains fuses that are responsible for fog lights, cabin fan, etc.


Posted on 14 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Doblo 2009-2021 - Where is the central locking fuse on the Fiat Doblò located? Read Answer
    • Doblo 2009-2021 - In which position is the starter relay on the Fiat Doblo? Read Answer
    • Doblo 2009-2021 - Where is the trunk light fuse located on the Fiat Doblò? Read Answer
    • Doblo 2009-2021 - Where is the meaning of all the warning lights on the Fiat Doblo? Read Answer
    • Doblo 2009-2021 - Where are the fuses of the Fiat Doblo? Read Answer
    • Doblo 2000-2009 - What is the central locking fuse of the doors in the Fiat Doblo? Read Answer
    • Doblo 2000-2009 - Where is the Fiat Doblò starter motor relay located? Read Answer
    • Doblo 2009-2021 - What is the central locking fuse on Fiat Doblò? Read Answer
    • Doblo 2009-2021 - What is the tailgate fuse of the Fiat Doblo? Read Answer
    • Doblo 2000-2009 - How to remove the fuse from the ceiling light of a Fiat Doblo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos