Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lights on a Fiat 500

Model: Fiat 500 - Years 2007-2022
Part: Tail light

In this tutorial, see how to remove the rear lights on a Fiat 500, a very simple and quick operation, necessary if you need to replace a bulb or the entire unit. First, ensure the key is not inserted, then open the boot. Locate the two bolts on the inner edge of the light and undo them with a 10mm spanner. Next, grasp the light unit, pull it towards you, and separate it from the bodywork. At this point, disconnect the power connector and proceed with replacing the damaged element.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Lights on the Fiat 500 Abarth
Replacing the Rear Lights on the Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) In today's tutorial video, you will find the instructions to remove and replace the rear lights with those from the facelift version of the Fiat 500 …
How to Replace the Rear Lights on the Fiat 500 Abarth
How to Replace the Rear Lights on the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In this video tutorial, you will see how to remove and replace the original rear lights with those from the facelift version on the Fiat 500, includi…
How to turn on and off the rear fog lights of the Fiat 500
How to turn on and off the rear fog lights of the Fiat 500
Fiat 500 (2007-2024 / 312) Today we will explain how to turn on and off the fog lights of the rear headlights of the Fiat 500. To turn on the fog lights, first we need to turn …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos