Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the dipped beam bulbs on the Fiat Ducato?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Light bulb

The video authors show the longer procedure for replacing the dipped beam lights on the Fiat Ducato. This requires completely removing the headlight by unscrewing all the screws and disconnecting the electrical connector, then pulling the headlight away from the vehicle to replace the bulbs (after removing the rubber cover). However, there is a quicker method where the headlight does not need to be removed; you can reach behind it to remove the rubber cover and extract the bulb. Although this method is quicker, it requires smaller hands and a good understanding of where the various components are located.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dipped Beam Bulbs on a Fiat Ducato?
How to Replace the Dipped Beam Bulbs on a Fiat Ducato?
Fiat Ducato (1993-2016 / MK 2) In the video, you can see what to do to access and replace the dipped beam bulbs. First, remove the front grille by opening the bonnet and taking out…
How to Replace the Starter Motor on the Fiat Ducato - Peugeot Boxer
How to Replace the Starter Motor on the Fiat Ducato - Peugeot Boxer
Fiat Ducato (2014-2026 / X290) In this brief guide, you will see the main steps to remove and replace the starter motor on the Fiat Ducato x290, as well as on the Peugeot Boxer. Fi…
How to Replace the Wing Mirror Cover on the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To replace the wing mirror cover on the Fiat Ducato, you need to loosen the screws that secure it to its housing: these screws are located at the top…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos