Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs on a Fiat Ducato?

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Light bulb

In the video, you can see what to do to access and replace the dipped beam bulbs. First, remove the front grille by opening the bonnet and taking out the screws that hold it in place. Next, remove the headlight bolt and disconnect the electrical connector; at this point, you can pull the headlight outwards. Finally, remove the plastic cover and take out the blown bulb. Once you have fitted a new bulb, refit the headlight by retracing the steps taken so far.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the dipped beam bulbs on the Fiat Ducato?
How to replace the dipped beam bulbs on the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) The video authors show the longer procedure for replacing the dipped beam lights on the Fiat Ducato. This requires completely removing the headlight …
How to Replace the Starter Motor on the Fiat Ducato - Peugeot Boxer
How to Replace the Starter Motor on the Fiat Ducato - Peugeot Boxer
Fiat Ducato (2014-2026 / X290) In this brief guide, you will see the main steps to remove and replace the starter motor on the Fiat Ducato x290, as well as on the Peugeot Boxer. Fi…
How to Replace the Wing Mirror Cover on the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To replace the wing mirror cover on the Fiat Ducato, you need to loosen the screws that secure it to its housing: these screws are located at the top…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos