Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How do you remove the door panel of the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2022
Part: Door panel
Operation: How do you remove the door panel of the Fiat 500?

The removal of the door panel of the Fiat 500 is done by detaching the chrome trim located at the base of the inner handle, leveraging it with a thin object. Once this has been removed, it will be possible to unscrew the screw located underneath it, also loosening the one near the window switch panel. After both screws have been removed, it will be possible to detach the panel from the door by disconnecting the underlying connectors. After the old panel has been completely removed, it will be possible to connect and secure the new one with the screws.


Posted on 20 July 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - Why won't the trunk of the Fiat 500 open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos