Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle of a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Handle

Before you start, open the door of your Fiat 500. Begin by removing the door panel, disengaging the clips, unscrewing the fixing screws, and finally detaching the door panel itself. Next, disconnect the rear plugs of the door panel to remove the internal cover of the door. This will give you access to the internal side of the external door handle. Now, unscrew the screws that secure the handle to the door, then disconnect the electrical connector. At this point, you can extract and remove the handle, completing the disassembly.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the External Door Handle of the Fiat 500
Replace the External Door Handle of the Fiat 500
Fiat 500 (2007-2022 / ) Today, we will go through the steps to remove and replace the external door handle of the front door on the Fiat 500. First, open the front door and …
How to Replace the External Door Handle on a Fiat 500
How to Replace the External Door Handle on a Fiat 500
Fiat 500 (2007-2022 / 312) To replace the external door handle on a Fiat 500, first remove the inner door panel by unscrewing the screws near the inner handle and the window sw…
Removing the External Handle and Lock of the Fiat 500
Removing the External Handle and Lock of the Fiat 500
Fiat 500 (2007-2021 / 312) In this tutorial, you will learn how to remove, in simple steps, the external handle and lock of a Fiat 500 door. First, open the front door and remo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos