Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Daytime Running Lights on the Fiat 500

Model: Fiat 500 - Years 2007-2022
Part: Light bulb

In today's video, learn how to replace the front daytime running lights on the Fiat 500. First, do not attempt this if the headlights have been on recently; allow the car to cool down. Start by turning the tyres to the opposite side of where you will work. Remove the fixing screws located inside the wheel arch. Next, take off the cover and access the light compartment. Extract the old bulb and insert the new unit. Test if it works correctly, then proceed to reassemble if it does. Complete the job.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate or deactivate daytime running lights with Fiat Uconnect
How to activate or deactivate daytime running lights with Fiat Uconnect
Fiat 500 (2007-2023 / ) Activating or deactivating the daytime running lights system on a Fiat 500 vehicle is a very simple and quick operation to perform independently thro…
Replacing the Daytime Running Lights on the Fiat 500
Replacing the Daytime Running Lights on the Fiat 500
Fiat 500 (2007-2021 / ) In this video tutorial, you will learn how to remove and replace the position bulbs and the indicator bulbs on the Fiat 500 in simple steps. First, r…
How to manually deactivate the daytime running lights on the Fiat 500
How to manually deactivate the daytime running lights on the Fiat 500
Fiat 500 (2007-2021 / 312) Daytime running lights enhance driving safety even outside of evening and night hours. However, there are times when you may need to deactivate them …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos