Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How do you install the gear knob with a syringe?

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Gear Shift Knob

In this video we see how to change the gear knob of a Fiat Seicento, installing a sporty one from "Sparco" that can be found on Amazon with the code B088MSH33H, priced at 42.05 with free delivery for Prime customers. Let's start by mentioning that at least on this car, the previous knob was removed by cutting it, and that on other cars at least part of the shaft needs to be removed using the same method. For the rest, the installation is simple: three screws are screwed onto the shaft, starting from the middle of the knob, because the lower part of the knob is self-locking. Reverse gear is engaged by pulling up the small ring.


Posted on 18 August 2023 by ScegliAuto



Repair of cap and knob Fiat 600
Fiat Seicento (1998-2010 / MK 1) To remove the gearshift gaiter we have to loosen the socket made by the lower hooks and which keep the same fixed with a medium-small flat screwdrive
How to remove the gear lever of the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) In this guide we will see the steps to disassemble and replace the gear lever of the Fiat Seicento, following the instructions below. First of all, l
How to carry out the review of the gear lever with play in a Fiat 600
Fiat Seicento (1998-2010 / MK 1) If you have play in the Fiat 600 gear lever and want to fix it, the first thing to do is to check the movement of the lever. If you feel too much pla

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos