Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Service warning light

The reset on the Fiat 500 cannot be performed using the dedicated controls on the steering wheel or the controls on the instrument cluster: to reset the warning light, you will need to use a diagnostic tool. This must be connected to the OBD port of the vehicle, which is located at the bottom left of the steering column: once the scanner is connected, you can select the car model in question and its corresponding version. By following all the instructions, you will be able to reset the warning light and then disconnect the scanner.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light on the Fiat 500?
Fiat 500 (2007-2021 / 312) To reset the Oil Service light on the Fiat 500, first perform the oil change following the guidelines provided in the tutorial. Next, enter the cabin…
How to Reset the Service Light on the Fiat 500
How to Reset the Service Light on the Fiat 500
Fiat 500 (2007-2021 / ) In today's video, you will see step-by-step instructions to reset the service light for oil change maintenance on the Fiat 500 in simple steps. First…
How to Reset the Oil Service Light on a Fiat 500L?
How to Reset the Oil Service Light on a Fiat 500L?
Fiat 500 (2012-2023 / 500 L) To reset the Oil Service light on a Fiat 500L, you must first change the oil. After the oil has been replaced, enter the cabin and turn on the igniti…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos