Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Fiat Panda 2

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

In this mini guide, discover how to replace the bulb inside the front headlamp of your Fiat Panda Mk2 (2003-2012). First, ensure the car is completely off, then lift the bonnet and use a 10mm spanner to remove all the screws located at the top and bottom of the headlamp.

Next, detach the headlamp by disconnecting the electrical connector and remove the protective cover to access the faulty bulb.

Finally, replace it with a new compatible bulb.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb in Your Fiat Panda
How to Replace the Front Headlamp Bulb in Your Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replacing the front headlamp bulb in your Fiat Panda is very simple. To complete the task, follow the procedure outlined in this guide. First, buy a …
How to Replace the Front Headlamp Bulb on a Fiat Panda?
How to Replace the Front Headlamp Bulb on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will learn how to replace the front headlamp bulb on a Fiat Panda. First, obtain the correct H4 replacement bulb, then switch o…
How to Replace the Daytime Running Light Bulb on the Fiat Panda?
How to Replace the Daytime Running Light Bulb on the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) To replace the daytime running light bulb on the Fiat Panda, open the bonnet to access the engine bay. The bulb to be replaced is located directly un…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos