Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Fiat 500X 1.3 Multijet?

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

See other generations:
Video tutorial

At the scheduled service interval, the vehicle reminds you to carry out the scheduled maintenance through the service light visible on the instrument panel. Once the work is completed, this light must be reset, and here a clear video guide comes to your aid with a simple sequence to follow.

With the ignition on, simply press the accelerator pedal three times within a maximum of 10 seconds, then release it and turn off the ignition. That's it, no further action is needed; the procedure is complete.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

Fiat 500 (2014-2022 / 500 X) After changing the engine oil and filter on this vehicle, you can reset the service light that has illuminated on the dashboard using a diagnostic sy…
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…
Fiat 500 (2014-2022 / 500 X) To replace the diesel filter on the Fiat 500X, open the bonnet to access the engine compartment: the diesel filter is located inside, at the top left…

    Frequently Asked Questions

    • 500 2007-2022 - What does the coupon expired warning light on the Fiat 500 mean? Read answer
    • 500 2007-2022 - What does the service light indicate in the FIAT 500? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the engine oil light on the Fiat 500? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos