Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Bravo
  6. : To reset the service light of the Fiat Bravo 2.

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Instrument cluster
Operation: To reset the service light of the Fiat Bravo 2.

To manually reset the service light that remains illuminated on the display of your Fiat Bravo 2, simply follow the following procedure. First, enter the car and turn on the ignition by turning the key. Simultaneously, press the accelerator pedal all the way down for about 15 seconds, then press the brake pedal 15 times. Afterward, hold down both pedals for a few seconds and wait for the service light on the display to turn off. Finally, release both pedals, and the reset procedure is successfully completed.


Posted on 24 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Bravo 2007-2014 - What does it mean that the Hill Holder of the Fiat Bravo is not available? Read Answer
    • Bravo 2007-2014 - What does the orange engine warning light on the Fiat Bravo 2 mean? Read Answer
    • Bravo 2007-2014 - What does the Fiat Bravo 2 service light indicate? Read Answer
    • Bravo 2007-2014 - What are the warning lights on the Fiat Bravo instrument cluster? Read Answer
    • Bravo 2007-2014 - What does the warning light indicate with a car and a padlock on the instrument panel of the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - What are the lights of the Fiat Bravo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos