Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Wheel Centre Cap of the Fiat 500 X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Wheel

See other generations:
Video tutorial

If, while changing the wheel or performing work on the wheel of your Fiat 500 X, the clips on the wheel centre cap come off, be aware that these clips are not available as spare parts. You need to replace the entire centre cap, which costs more than £20. The YouTuber shows an ingenious way to fix it at minimal cost.

You will need two Fischer expansion plugs: Drill a 5 mm hole in the centre cap and insert the screw, cut the plug to 4 cm and insert it into the centre cap. Then screw it into place; the plug expands and stays in position. Naturally, the screw can be painted the same colour as the centre cap so that it is no longer visible.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Fit Wheel Trims on a Fiat 500
How to Fit Wheel Trims on a Fiat 500
Fiat 500 (2007-2024 / 312) Are the wheel trims damaged and do you want to replace them? How do you remove and replace the trims on a Fiat 500? Use a screwdriver to pry or use y…
How to Replace the Track Rod Ends and Steering Rods on a Fiat 500
How to Replace the Track Rod Ends and Steering Rods on a Fiat 500
Fiat 500 (2007-2022 / 312) In today's video, learn how to replace the track rod ends and steering rods on a Fiat 500. First, lift the vehicle on a ramp. Next, remove the tyre f…
How to change a tire on a Fiat 500 Storica
How to change a tire on a Fiat 500 Storica
Fiat 500 (1957-1975 / Epoca) How do you change the tire on a Fiat 500 Storica? Let's see it in this video. The car must be parked on a flat surface, in a safe place, with the gea…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos