Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Track Rod Ends and Steering Rods on a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Checks and maintenance

In today's video, learn how to replace the track rod ends and steering rods on a Fiat 500. First, lift the vehicle on a ramp. Next, remove the tyre from the working side; then extract the wheel arch cover and unscrew the bolts of the wheel rim. Remove the front arm. At this point, you can access the track rod ends and the corresponding rod. Unscrew the respective retaining bolts, then remove the components. Insert the new units and then proceed to reassemble everything, following the steps completed earlier. Finally, finish the job.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Let's see how to restore the hood of the Fiat 500 cabrio, specifying that in this video a Fiat Abarth 595 is shown, but nothing changes regarding the…
Fiat 500 (2014-2022 / 500 X) Here are step-by-step instructions on how to remove and replace the steering column or EPS of the Fiat 500 X. First, open the front door and start by…
Fiat 500 (2007-2022 / ) Below are the main instructions that will allow you to remove and replace the steering torque sensor in the Fiat 500, in simple and quick steps. Firs…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos