Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to paint the rims of the Fiat 500L Trekking black?

Model: Fiat 500 500 L - Years 2012-2023
Part: Wheel rim

The video shows the entire process of painting black the alloy wheels of a Fiat 500L: we start by removing the tires and then carefully clean and degrease the wheels. The surface of the wheel is then sanded to create the right roughness and promote paint adhesion. At this point, a layer of adhesive primer is applied as a base for the black paint. We spray the paint on the wheels, whether it is matte black or glossy black, according to our personal tastes. We let the wheels air dry completely for 24 hours, then apply a layer of protective clear coat, and enjoy the result of the wheels painted black with an obvious improved aesthetic effect.

Posted on 2 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Fiat 500L Trekking
How to Reset the Tyre Pressure Warning Light on a Fiat 500L Trekking
Fiat 500 (2014-2022 / 500 X) Has a tyre pressure warning light appeared on your dashboard and you don't know how to turn it off? Let's see in this video how to reset the tyre pre…
Tow Bar Installation on Fiat 500 L Trekking
Tow Bar Installation on Fiat 500 L Trekking
Fiat 500 (2012-2023 / 500 L) In today's video, you will see how to install a tow bar on a Fiat 500 L, Trekking version. In this case, our vehicle is already prepared for the tow …
How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos