Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speedometer on a Fiat Panda 1.1

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Instrument cluster

Replacing the speedometer on a Fiat Panda 1.1 is a very simple operation that you can do independently, thanks to our brief video tutorial. Start by opening the bonnet and removing the spare wheel. To make access easier, also remove the plastic cover beneath the wheel; at this point, you will easily notice the speedometer cable. It is not necessary to remove the instrument cluster to carry out the speedometer removal; you just need to detach the grommet and the plastic ring to do so. Now, follow the cable to reach the connector on the passenger side. Once everything is removed, simply follow the reverse procedure to install the new speedometer.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster on a Fiat Panda?
How to Remove the Instrument Cluster on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the instrument cluster on the Fiat Panda, first remove the trim surrounding it. Loosen two screws located directly above the speedometer an…
How to Reset the Maintenance Light on the Fiat Panda
How to Reset the Maintenance Light on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you can see how to reset the maintenance light on the Fiat Panda by following simple steps: first, perform maintenance on you…
Everything You Don't Know About the Fiat Panda
Everything You Don't Know About the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) The Fiat Panda is undoubtedly the most purchased car by families and more. Sometimes it is thought that due to its size, the Panda does not have any …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - How do you access the on-board menu of the Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos