Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Oil of the Fiat Ducato 2.3 Multijet

Model: Fiat Ducato X250 - Years 2006-2014
Part: Transmission fluid

Follow the procedure to drain and refill the transmission oil of the Fiat Ducato as part of regular maintenance. First, lift the vehicle and start unscrewing the drain plug located on the transmission casing, allowing the oil to drain into a container for about ten minutes; then unscrew the filler plug and pour in the new gear oil suitable for the transmission. It is important to pour the correct amount of gear oil as indicated in the vehicle's user and maintenance manual.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the oil filter and engine oil in the Fiat Ducato Multijet
How to replace the oil filter and engine oil in the Fiat Ducato Multijet
Fiat Ducato (2014-2026 / X290) Replacing the oil filter on the Fiat Ducato Multijet is a very simple operation to perform independently. To facilitate the oil draining from the pan…
How to reset the oil light on the Fiat Ducato
How to reset the oil light on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) To reset the oil warning light related to the oil change on a Fiat Ducato Multijet vehicle, we need to turn on the instrument panel and press the acc…
Replacing the Timing Belt on the Fiat Ducato 2.3 MultiJet
Replacing the Timing Belt on the Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will learn how to remove and replace the timing belt on the Fiat Ducato 2.3 MultiJet, following the instructions below. F…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos