Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Gearbox Oil on a Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Transmission fluid

To change the gearbox oil on a Fiat Ducato, lift the vehicle to access the underside of the engine bay: here you will locate the gearbox and need to unscrew the relevant drain plug to collect the used oil in a suitably positioned container. Once the oil has completely drained, close the drain plug and open the bonnet to access the inside of the engine bay. Here you will find the filler where you need to insert the gearbox oil; the bonnet can then be closed once the top-up is complete.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Ducato (2014-2026 / X290) To change the gearbox oil of the Fiat Ducato, lift the vehicle to access the underside of the engine bay: here you will find the gearbox and need to …
Fiat Ducato (1993-2016 / MK 2) To replace the clutch on a Fiat Ducato II, lift the vehicle and secure it on axle stands. Disconnect the battery and remove any components that obstr…
Fiat Ducato (2014-2026 / X290) The gear change on a Fiat Ducato can become stiff or jam, especially in vans left unused during winter. The cause is almost always corrosion of the l…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos