Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Fiat Ducato

Model: Fiat Ducato MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Clutch

See other generations:
Video tutorial

To replace the clutch on a Fiat Ducato II, lift the vehicle and secure it on axle stands. Disconnect the battery and remove any components that obstruct access to the gearbox.

Drain the gearbox oil and disconnect the drive shafts, linkages, and connectors attached to the gearbox. Support the engine with an appropriate stand and unscrew the gearbox supports.

Remove the gearbox by separating it from the engine until you can access the clutch assembly. Unscrew the clutch flywheel and remove the disc, pressure plate, and release bearing.

Check the condition of the flywheel and replace if necessary. Install the new clutch kit, ensuring the disc is centred.

Reattach the gearbox, reconnect all components, refill the gearbox oil, and check for proper operation with the engine running.


Posted on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on the Fiat Ducato?
How to Replace the Clutch on the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) You can replace the clutch installed on the Fiat Ducato by lifting the vehicle to gain access to the components in the lower part of the engine bay: …
How to Replace the Clutch on a Fiat Ducato
How to Replace the Clutch on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) To replace the clutch on a Fiat Ducato, lift the vehicle using a jack or ramp to loosen the front left wheel. Once the wheel and corresponding wheel …
Guide to replacing the clutch of the Fiat Ducato 2.3 Multijet
Guide to replacing the clutch of the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) Today's main steps will show us how to disassemble and replace the clutch kit of the Fiat Ducato 2.3 Multijet. First, we lift the vehicle and start b…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos