Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gearbox Oil of the Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Transmission fluid

See other generations:
Video tutorial

To change the gearbox oil of the Fiat Ducato, lift the vehicle to access the underside of the engine bay: here you will find the gearbox and need to unscrew the drain plug to collect the used oil in a suitably positioned container. Once the oil has completely drained, close the drain plug and open the bonnet to access the engine bay. Here you will find the filler where you need to insert the gearbox oil; after topping up, close the bonnet.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Fiat Ducato
How to Replace the Clutch on a Fiat Ducato
Fiat Ducato (1993-2016 / MK 2) To replace the clutch on a Fiat Ducato II, lift the vehicle and secure it on axle stands. Disconnect the battery and remove any components that obstr…
How to Change the Gearbox Oil on a Fiat Ducato
How to Change the Gearbox Oil on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) To change the gearbox oil on a Fiat Ducato, lift the vehicle to access the underside of the engine bay: here you will locate the gearbox and need to …
How to Fix the Stiff Gear Change on a Fiat Ducato Van
How to Fix the Stiff Gear Change on a Fiat Ducato Van
Fiat Ducato (2014-2026 / X290) The gear change on a Fiat Ducato can become stiff or jam, especially in vans left unused during winter. The cause is almost always corrosion of the l…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos