Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Cabin Fan on the Fiat Doblò

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Blower motor

See other generations:
Video tutorial

Today's instructions will show you the procedure for removing and replacing the cabin fan on the Fiat Doblò. First, get inside the vehicle and remove the plastic cover located at the bottom to access the cabin fan compartment; then disconnect the power connector and unscrew the fixing screws to remove it, as shown in the video.

At this point, remove and replace the cabin fan, reconnect it, and check its operation before reassembling everything, following the video tutorial to the end!


Updated on 3 September 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Fan Resistor on the Fiat Doblò
Replacing the Cabin Fan Resistor on the Fiat Doblò
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) In today's video tutorial, you will find instructions on how to remove and replace the cabin fan resistor on the Fiat Doblò. First, get inside the ve…
Where to Find and How to Access the Radiator Fan Fuse on a Fiat Doblo
Where to Find and How to Access the Radiator Fan Fuse on a Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) The radiator fan fuse on your Fiat Doblo is located inside the fuse box. The fuse box itself is situated in the engine compartment, near the battery.…
Where are the fuses in the Fiat Doblò?
Where are the fuses in the Fiat Doblò?
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Inside the Fiat Doblò, all fuses are divided within the appropriate fuse boxes present in the vehicle: these are located inside the cabin and in the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos