Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Grande Punto alternator pulley problem 1.3 mjt

Fiat Punto - Video tutorial

Model: Fiat Punto Punto EVO, Grandepunto , MK 3, 199 - Years 2005-2018
Part: Alternator
Operation: Grande Punto alternator pulley problem 1.3 mjt

If it happens that after starting the engine you hear a squeak coming from the engine compartment and this intensifies as you accelerate, then it is likely that there may be a fault in the alternator clutch pulley, or better called free wheel (this is of a device that allows the integral movement only when the pinion is rotated in the direction of motion at the same speed as the shaft, while in the opposite direction it produces no movement); to replace the pulley, first of all you need to equip yourself with the special disassembly key and, once the auxiliary belt has been removed, you can also try to replace it without disassembling the alternator itself.


Posted on 14 September 2023 by ScegliAuto



How to replace the alternator of the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Today we will see, in this short guide, the instructions that will allow us to disassemble and replace the alternator of the Fiat Grande Punto, as we
Replacement of the alternator of the Fiat Punto Evo
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video we will see how to remove and replace the alternator of the Fiat Punto Evo 1.2 petrol engine, but also of the Grande Punto. First of
How to remove the alternator on Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) How to remove the alternator on Fiat Grande Punto? We pull the bar located at the bottom left of the dashboard and lift the bonnet putting it in safe

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - How much does the alternator pulley cost on the Fiat Punto 1 3 multijet? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos