Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to remove the alternator on Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto Punto EVO, Grandepunto , MK 3, 199 - Years 2005-2018
Part: Alternator
Operation: How to remove the alternator on Fiat Grande Punto

How to remove the alternator on Fiat Grande Punto? We pull the bar located at the bottom left of the dashboard and lift the bonnet putting it in safety, we identify the battery of the power supply and disconnect the terminals. Unscrew the pins with a socket wrench, being careful not to damage the cable winding membranes, unscrew all the alternator tightening pins. Once the disassembly is finished, take it out of the engine compartment. Now we take the new replacement part and insert it into the suitable housing, screw in the locking pins, then, tighten the side pins of the alternator. We check the right voltage with a tester by connecting it to the battery.


Posted on 19 October 2023 by ScegliAuto



How to replace the alternator of the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Today we will see, in this short guide, the instructions that will allow us to disassemble and replace the alternator of the Fiat Grande Punto, as we
Replacement of the alternator of the Fiat Punto Evo
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video we will see how to remove and replace the alternator of the Fiat Punto Evo 1.2 petrol engine, but also of the Grande Punto. First of
How to change the alternator of the Fiat Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Let's see the replacement of the alternator of a Fiat Punto. We lift the front hood of the engine, we locate the alternator. We disconnect the batter

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - How much does the alternator pulley cost on the Fiat Punto 1 3 multijet? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos