Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of the Fiat 126

Model: Fiat 126 MK 1 - Years 1972-1991
Part: Engine

In this video, see how to dismantle the 650cc engine of the Fiat 126. Dismantling this engine is extremely simple compared to modern vehicles, as it is held in place by just one bracket. Once you disconnect the gearbox, simply remove the bracket, as shown in the video, and unscrew the bolts that secure the bumper to the chassis, allowing you to literally "pull out" the engine block from inside the vehicle. Naturally, you will need to remove various connections first, such as the air ducts, electrical connections (few in reality), and all the hoses connecting to the various components, but it is really quite straightforward.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Engine from a Fiat 126?
How to Remove the Engine from a Fiat 126?
Fiat 126 (1972-1991 / MK 1) In this guide, you will see the main steps on how to disassemble and remove the entire engine block from a Fiat 126, as well as from a classic Fiat 5…
Engine Oil Change for the Fiat 126
Engine Oil Change for the Fiat 126
Fiat 126 (1972-1991 / MK 1) In this video, see how to change the engine oil of the Fiat 126, as well as the classic 500. First, lift the vehicle and start by removing the rear b…
How to Change the Engine Oil of the Fiat 126
How to Change the Engine Oil of the Fiat 126
Fiat 126 (1972-1991 / MK 1) Briefly change the engine oil on the Fiat 126 by following the instructions below. First, raise the vehicle and remove the oil drain bolt located on …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos