Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change for the Fiat 126

Model: Fiat 126 MK 1 - Years: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983
Part: Engine oil

Video tutorial

In this video, see how to change the engine oil of the Fiat 126, as well as the classic 500. First, lift the vehicle and start by removing the rear bonnet, unscrewing the hinge screws; then use a socket spanner to undo the bolt of the rear bumper, as shown in the video.

At this point, unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then replace the plug and pour in the new oil of the correct type, filling to the required level!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Fiat 126
How to Change the Engine Oil of the Fiat 126
Fiat 126 (1972-1991 / MK 1) Briefly change the engine oil on the Fiat 126 by following the instructions below. First, raise the vehicle and remove the oil drain bolt located on …
How to Remove the Engine from a Fiat 126?
How to Remove the Engine from a Fiat 126?
Fiat 126 (1972-1991 / MK 1) In this guide, you will see the main steps on how to disassemble and remove the entire engine block from a Fiat 126, as well as from a classic Fiat 5…
How to replace the door lock on the Fiat 126?
Fiat 126 (1972-1991 / MK 1) To replace the door lock on the Fiat 126, remove the fabric inner door panel by simply unclipping its fastening clips. This will allow access to the …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos