Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Rear bumper

Removing the rear bumper is very simple on this car model. You will need a flathead screwdriver, a Torx T30, and an 8 mm socket wrench. Start by accessing the rear wheel arches and unscrewing the star-shaped fixing screws along the edge of the bumper to move them enough to reach the Torx screw that secures the corner of the bumper to the car body. Next, open the boot to remove the lights, under which you will find more fixing screws for the bumper. Finally, there are additional screws along the lower edge, and to complete the removal, disconnect the connectors.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…
Removing the Rear Bumper from the Fiat 500 X
Removing the Rear Bumper from the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In today's tutorial, you will learn how to remove and replace the rear bumper of the Fiat 500 X 4x4, following the instructions below. First, open th…
How to Remove the Rear Bumper from a Fiat 500
How to Remove the Rear Bumper from a Fiat 500
Fiat 500 (2007-2021 / ) To remove the rear bumper from a Fiat 500, open the tailgate to access the screws located at the top of the bumper. Next, unscrew the screws next to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos