|
Do it yourself
| |||
| ||||
Issue with the Electric Window Mechanism of the Fiat Punto MK2
Model: Fiat Punto
MK 2, 188
- Years 1999-2011
This video shows how to remedy a common issue with the electric window mechanism of the Fiat Punto MK2. The presenter has verified that all contacts on the electronic board are functioning, and the connectors coming from inside the vehicle have the correct voltage. However, when connecting the plugs to the electronic board, he notices a voltage drop of over one volt. What could be the problem? It is likely a contact that is no longer functioning properly. Therefore, using a small screwdriver, try to move the metal tabs inside the negative connector to increase their resistance and perform a test before reassembling everything. Operation successful.
Updated on 12 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
In this video tutorial, you will learn how to reset and repair the non-functioning window switches on the Fiat Grande Punto, due to intermittent oper…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
In this guide, learn the steps to remove the front door panel and window regulator motor on the Fiat Grande Punto, as well as the Punto Evo. First, o…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Learn how to remove and replace the window switch or button of the Fiat Grande Punto, as well as the Punto Evo, by following these simple and quick s…
Other guides you may be interested in |
Frequently Asked QuestionsHow to replace the horn on a Renault Duster - Dacia Duster
Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |