Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Dashboard Clock on the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Clock

To adjust the dashboard clock, turn on the ignition and press the SET button located just below the radio display, to the left of the indicator switch, to access the settings MENU displayed on the central dashboard. Use the buttons to the right and left of the SET button to scroll through the menu options until you reach 'Set Time', press SET to confirm, and adjust the clock using the arrows next to the SET button, starting with the hour. Press SET to move to the minute adjustment and then press SET again to confirm.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Fiat Panda?
How do you set the clock on the Fiat Panda?
Fiat Panda (2012-2023 / ) To adjust the clock of the Fiat Panda, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once it is…
How to set the time on the Fiat Panda
How to set the time on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Below we will see the information that will allow us to adjust the time on the display of the Fiat Panda's instrument panel. First, we get into the c…
How to adjust the clock on the instrument panel of the Fiat Panda
How to adjust the clock on the instrument panel of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Adjusting the time on the instrument panel of the Fiat Panda, a model produced from 2003 to 2012, is a simple and quick operation to be carried out i…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2021 - How to set the time in the Fiat Panda? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos