Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the EOBD Socket on the Fiat Panda and How to Perform Diagnostics

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Checks and maintenance

This video shows how to locate the EOBD (European On Board Diagnostic) socket and how to perform diagnostics yourself. The socket is located behind the panel between the steering wheel and the driver's door. There is a plastic cover that is only held in place by clips, and you just need to pull it off with a bit of force. Behind it, you will find the socket. Naturally, you will need to purchase an OBDII interface, which can be found on various e-commerce sites: for example, the one used by our YouTuber can be found on Amazon with the code B0BVG93SDP for £10.49, including delivery. Then, you will need to download an app for decoding on your smartphone: he recommends Torque. After connecting the interface, turn the key in the vehicle, and the app will provide a lot of information. To replace the cover, simply clip it back in place and push.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Fiat Panda 3 located?
Where is the OBD port of the Fiat Panda 3 located?
Fiat Panda (2012-2026 / 319, MK 3) If you own a third series Fiat Panda and want to find out where the OBD port is located, all you have to do is read the following guide carefully and…
How to Reset the Service Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This video shows how to reset the service light on your Fiat Panda using a diagnostic scanner programme called X431 Pro3. First, launch the X431 Pro3…
Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Fiat Panda (2003-2012 / 169, MK 2) The Fiat Panda, model mk2, has two fuse boxes and an OBD port inside. The first fuse box is installed inside the cabin behind a part of the dashboard…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos