Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlamp Bulb of the Fiat Punto MK3

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Headlight bulb

When the dipped beam bulb of the Fiat Punto blows, you must replace it as soon as possible for your safety and to avoid a fine. Open the bonnet of the engine compartment and stand in front of the headlamp containing the bulb to be replaced. Working from the inside, remove the rubber cover protecting the bulb, pull out the electrical connector, and unclip the metal retaining clip holding the bulb in place. Remove the burnt bulb and replace it with a new one, taking care not to touch the glass bulb with bare fingers. Refit the clip, reconnect the connector, and replace the rubber cover.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Fiat Punto 3
How to replace the rear headlight bulb of the Fiat Punto 3
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replacing the rear headlight bulb of the Fiat Punto MK3 model is a simple and quick operation to carry out independently. To replace the bulbs, we ne…
How do you replace the front headlight bulb of the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to replace the headlight bulb of the Fiat Punto, you need to open the hood so that you can access the components inside the engine compartme…
How to Replace the Front Headlight Bulb of the Fiat Punto
How to Replace the Front Headlight Bulb of the Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front headlight bulb of your Fiat Punto (2005-2018), follow the instructions in this mini guide. The entire operation takes just a few…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos