Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the "Hold'n'go" System on the Fiat 500 Electric

Model: Fiat 500 500 E, 332 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Onboard computer

See other generations:
Video tutorial

In this video, you will see how to disable the "Hold'n'go" function on the Fiat 500 electric. This is an additional function to prevent the car from moving by itself, indicated by a green light with an "H" in the centre.

Even if it is in neutral, the vehicle does not move, and it cannot be moved even by pushing; this can be a hindrance in situations like car washes, where the vehicle needs to be "guided" onto the rails. To disable this function, go to the multimedia screen, select "vehicle"/"settings", scroll through the menu until you reach the "brakes" option, and here you can uncheck the function that normally deactivates when the accelerator is released.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to enable and disable traction control on an electric Fiat 500
How to enable and disable traction control on an electric Fiat 500
Fiat 500 (2020-2026 / 500 E, 332) In this video, we will see how to enable or disable the electronic traction control on an electric Fiat 500. The TSC (Traction Control System) is an …
How to Remove the Electric Handbrake of the Fiat 500X
How to Remove the Electric Handbrake of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Have you purchased a Fiat 500X with an electric handbrake and don't know how to engage or disable it? Don't worry, our short video tutorial will expl…
How to Disable the Traction Control on the Fiat 500
How to Disable the Traction Control on the Fiat 500
Fiat 500 (2007-2021 / ) The electronic traction control system in the new Fiat 500 is factory activated. It is a fully automatic system that can cut engine power to prevent …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos