Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the electric handbrake of the Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Parking brake

You have purchased a Fiat 500X with an electric parking brake and do not know how to engage or disengage the brake? Don't worry, our short video tutorial is designed to explain how to perform these simple actions. To engage the parking brake of a vehicle, we must lift the button located on the lower part of the dashboard and press the brake pedal twice in a row. To disengage the parking brake of a vehicle after having previously engaged it, we must press the button located on the lower part of the dashboard. These two steps are applicable to any vehicle with an electric parking brake.

Posted on 7 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…
Resetting the Service Indicator on a Fiat 500X
Resetting the Service Indicator on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) The video shows how to reset the service indicator on a Fiat 500X. It is a very simple operation that can be done in no time, saving a fair amount of…
How to Remove the Rear Bumper from a Fiat 500X
How to Remove the Rear Bumper from a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In today's video, we will see how to remove the rear bumper from a Fiat 500X. First, remove the plastic wheel arch clips at the rear of the vehicle. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos