Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Fuel pump

First, locate the position of the pump; it is situated directly under the rear passenger seat. Remove the screws securing the upper cover and the subsequent pump cover. Clean the area thoroughly to prevent dirt from entering the tank, then disconnect the electrical connectors and the fuel line. Next, unscrew the tank cap and extract the pump. Complete your replacement by installing the new pump and retracing the steps described for reassembly.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's main steps will show us how to disassemble and replace the fuel pump of the Fiat Panda, following the instructions below. First, we open the …
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will learn how to remove and replace the fuel pump or low-pressure fuel sender on a Fiat Panda 4x4 (169). First, open the rear …
How to Remove the Fuel Pump from a Fiat Panda
How to Remove the Fuel Pump from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the fuel pump from a Fiat Panda? Start by disconnecting the battery cables, then remove the rear seat cushions of the car. Use a socket…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos