Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting a Cone Air Filter

Model: Fiat 500 312 - Years 2007-2024
Part: Air filter

Using a ratchet spanner, detach the expansion pipe of the air filter and the hose. Remove the fixing screws of the air box and take out the filter, hose, and expansion piece. Connect the rubber hose of the new filter to the engine's vapour recovery inlet. Using the new hose provided, attach it to the air intake. Also, secure the new manifold and connect the various hoses. Insert another hose onto the manifold that will be attached to the filter. Refit the old filter in the air box and close the cover. Verify correct operation and new performance with a road test.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 air filter assembly and disassembly
Fiat 500 air filter assembly and disassembly
Fiat 500 (2007-2024 / 312) We replace the engine air filter of a Fiat 500 if we have traveled more km than expected. Let's see how to do it. We open the car door, pull up the e…
How to change the cabin air filter on a Fiat 500
How to change the cabin air filter on a Fiat 500
Fiat 500 (2007-2024 / 312) In this video we see how to remove the cabin air filter on a Fiat 500. The cabin filter can be found at the bottom left of the glove box. With a plas…
Replacing the cabin filter on Fiat 500l
Replacing the cabin filter on Fiat 500l
Fiat 500 (2012-2023 / 500 L) On Fiat 500l the cabin air filter, or pollen filter, is located behind the glove box. Open this drawer, therefore, and empty it completely. Remove th…

Other guides you may be interested in

How to Remove the Door Panel on Nissan Micra

How do you remove the door panel (right side) on a Nissan Micra? Use a lever or screwdriver to pry at the handle on the door panel, detach it, and disconnect the terminals of the window switch (manual crank). Use a fixed screwdriver to unscrew the screws on the panel, then use a plastic lever to unclip all the clips around the perimeter of the door. Finally, pull away the panel with your hands, disconnecting the opening lever cable, the window lifter terminals, and the speakers. Reassemble everything by reversing the steps.

Watch the video!


by ScegliAuto

More videos