Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Driving Modes of the Fiat 500-E

Model: Fiat 500 500 E, 332 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Onboard computer

See other generations:
Video tutorial

In this video, discover the three selectable driving modes from the i-mod on the Fiat 500-E. The first is the "normal" mode, very similar to a traditional automatic gearbox, where you will use the accelerator and brake pedals, along with the automatic gearbox simulator.

The second mode is called "range", where releasing the accelerator pedal causes the car to brake until it comes to a complete stop.

The third mode is called "sherpa", which combines one-pedal driving with energy saving, limiting the speed to 50 miles/h and turning off all non-essential functions, such as the climate control and multimedia screen.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How do you replace a rear taillight bulb in the Fiat 500?
How do you replace a rear taillight bulb in the Fiat 500?
Fiat 500 (2007-2024 / 312) In this video guide, it is worth noting, we will see a Fiat 500 L, but the procedure is identical to the Fiat 500, so it can be taken into considerat…
How to set the rear calipers of a Fiat 500 in service mode
How to set the rear calipers of a Fiat 500 in service mode
Fiat 500 (2007-2024 / 312) In this video, we see how to set the rear calipers of a Fiat 500 in service mode using the car's Uconnect system. We turn on the ignition and access …
How to Turn on the Fog Lights on a Fiat 500
How to Turn on the Fog Lights on a Fiat 500
Fiat 500 (2007-2022 / ) In this brief video guide, learn how to turn on the fog lights on a Fiat 500, model produced from 2007 to 2022. The fog lights can only be activated …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos