Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Diesel Fuel Filter (MultiJet Engine)

Model: Fiat Punto - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Diesel fuel filter

See other generations:
Video tutorial

Replacing the fuel filter is a simple task that should be done frequently for optimal performance. You will need two tools to extract the filter.

Start by disconnecting the fuel connector, lift the filter upwards, and disconnect the fuel pipes to allow the diesel to drain. Unscrew the filter cover and remove it. The filter cartridge is attached to the cover and can be removed by applying some force.

Replace the cartridge and refit the cover, replacing the rubber seal. Reconnect the pipes and the connector.

Clean up any spilled fuel thoroughly to prevent fire hazards.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on the Fiat Punto 1.3 Multijet
Replacing the Diesel Filter on the Fiat Punto 1.3 Multijet
Fiat Punto (1999-2011 / MK 2, 188) Below are the necessary instructions to remove and replace the diesel filter on the Fiat Punto 1.3 Multijet. First, open the bonnet of your car and s…
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as on the Punt…
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to remove and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as the Punto Evo. F…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos