Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the license plate light of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: License plate light

When the light of the license plate on your new Fiat 500 stops working, you must replace it immediately so as not to run into any administrative trouble. In the following guide, we will discover together how to correctly replace it. Before starting with the actual procedure, we remind you that it is necessary to mount a new bulb perfectly compatible and the car must remain off for the entire duration of the operation. Lift the front hood of the vehicle and remove the taillight with a flathead screwdriver. Then replace the old bulb with the new one.

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Install the LED Number Plate Light on a Fiat 500
How to Install the LED Number Plate Light on a Fiat 500
Fiat 500 (2007-2024 / 312) In this video, see how to change the number plate light on a Fiat 500: the procedure is the same for Cabrio and Abarth versions. Go to the rear of th…
Guide to Replacing the Number Plate Lights of a Fiat 500
Guide to Replacing the Number Plate Lights of a Fiat 500
Fiat 500 (2007-2021 / 312) In this short and simple guide, you will understand the steps to disassemble and replace the number plate bulbs of a Fiat 500, following the instruct…
How to Change the Number Plate Bulb on a Fiat 500
How to Change the Number Plate Bulb on a Fiat 500
Fiat 500 (2007-2024 / 312) In this video, we will see how to change the number plate bulbs on a Fiat 500. Use a screwdriver to remove the number plate light located in the rear…

    Frequently Asked Questions

    • 500 2007-2024 - Why is the license plate light on the Fiat 500 not working? Read answer
    • 500 2007-2024 - How to replace the license plate lights in the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos