Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: License plate light

Let's see how to replace the damaged number plate bulb on a Fiat 500. Use a screwdriver or plastic lever to remove the number plate light located in the rear bumper of the car. Once the light is removed, extract the bulb holder by hand, then disconnect the bulb from it. Install the new LED bulb (same size and voltage), inserting it into the bulb holder. Refit the light into the metal of the tailgate, pressing until the clips lock automatically. Finally, test the correct operation of the previously installed bulb.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Fog Light Bulb on a Fiat 500 X
How to Replace the Fog Light Bulb on a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the fog light bulb on a Fiat 500 X is a very simple task that can be done independently. Start by removing the wheel arch liner on the side…
How to replace the stop bulb in a Fiat 500 L
How to replace the stop bulb in a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you can see how to replace the stop bulb in a Fiat 500 L by following some simple steps that will help you work independently…

    Frequently Asked Questions

    • 500 2007-2024 - Why is the license plate light on the Fiat 500 not working? Read answer
    • 500 2007-2024 - How to replace the license plate lights in the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos