|
Do it yourself
| |||
| ||||
How to replace the front strut mount of the Fiat Doblo
Model: Fiat Doblo
223, MK 1, Doblo 1
- Years 2000-2009
To replace the front shock absorber strut on a Fiat Doblo vehicle, we first need to open the front hood and clean the strut mounting elements with WD40 spray. Using a 13mm socket wrench, we loosen the bolt and then using a 7mm socket wrench, loosen the nuts of the right front wheel and lift the car; remove the wheel completely. We then continue by removing the brake hose and using a 19mm socket wrench, remove the nuts that secure the strut to the ball joint, then tap the ball joint spindle and remove the bolts with a punch. Finally, we unscrew the ball joint spindle and unscrew the top part of the strut completely, extracting the spring. Now we can proceed to the installation of the new strut. We start by inserting the spring into the compression support, press and remove the strut, shock absorbers, and hydraulic compressor. We continue by inserting the new parts and in reverse order, perform the same procedure described earlier.
Posted on 7 July 2024 by ScegliAuto
Video tutorial
Related tutorials
Fiat Doblo
(2000-2009 /
223, MK 1, Doblo 1)
In order to replace the rear shock absorber on the Fiat Doblò, the vehicle must be raised so that the bolts that secure the rear wheel to its housing…
Fiat Doblo
(2000-2009 /
223, MK 1, Doblo 1)
In this video tutorial we will see how to replace the rear shock absorber on a first series Fiat Doblò. Obviously to do this we go to lift the car fr…
Fiat Doblo
(2009-2021 /
Doblo 2, 263, MK 2)
Want to remove the rear shock absorber on a Fiat Doblo? Follow these steps carefully: loosen the wheel bolts with an appropriate tool (telescopic spa…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Radio in a Ford Focus
First, engage the handbrake and put the car in a low gear to prevent it from rolling during the replacement. Next, lift the bonnet to disconnect the battery cables and protect the electronic components. Unscrew the two screws located under the front panel of the stereo. Use a plastic lever to lift the bottom of the stereo. Disconnect the connector at the bottom and also remove the stereo lock at the back. Now, install the new stereo following the guides from the old one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |