Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

To carry out this operation, you will need access to the rear of your vehicle, particularly the area securing the lights. Open the boot lid to remove the screws securing the light itself.

You can then extract the light from the vehicle by pushing it outwards. Disconnect the connectors at the back of the light and make the necessary repairs.

If needed, repeat the process on the other side of your vehicle and retrace the steps for reassembly.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulbs of the Fiat Panda 3
How to replace the rear headlight bulbs of the Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) Today we will explain how to replace the rear headlight bulbs of a Fiat Panda 3 vehicle. The bulbs we suggest using for replacement are the Bolch mod…
Replace Headlight Bulbs on a Fiat Panda
Replace Headlight Bulbs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the headlight bulbs on your Panda damaged? Not lighting up anymore? Here's how to change them. Open the bonnet by pulling the lever located at th…
How to Replace the Dipped Beam Bulbs in a Fiat Panda
How to Replace the Dipped Beam Bulbs in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This short video will show you how to remove the old H4 bulbs for the dipped beams in your Fiat Panda and replace them with new bulbs. This is a simp…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos