Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Fiat Panda 3

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Tail light bulb

Today we will explain how to replace the rear headlight bulbs of a Fiat Panda 3 vehicle. The bulbs we suggest using for replacement are the Bolch model H4 12 Volt. To replace the bulbs, open the trunk and remove the two screws from the external headlight support using a ratchet, an extension, and a 10mm socket wrench. Pull the headlight horizontally to remove it, and press on the plastic tab to disconnect the connector. Remove the light fixture and replace the bulbs. Mount the bulbs and attach the plate, then connect the connector to insert the headlight into its housing. Install the headlight by screwing in the screws on the side support and proceed with the same steps for replacing the bulbs of the right rear headlight.

Posted on 4 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Fiat Panda
How to replace the rear headlight bulbs of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will discover step-by-step instructions on how to disassemble and replace the bulbs of the rear light of the Fiat Panda. First, open the rea…
How to replace the rear headlight bulb of the Fiat Panda
How to replace the rear headlight bulb of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will explain how to replace the rear headlight bulbs of the Fiat Panda model 2. To replace the bulbs, we need to open the trunk and unscrew …
How to replace the rear windshield wiper of the Fiat Panda
How to replace the rear windshield wiper of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If you are planning to replace the rear windshield wiper of your Fiat Panda second series by yourself, just read the following guide carefully and ap…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos