Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to replace the bulb of the Fiat Panda.

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Headlight
Operation: How to replace the bulb of the Fiat Panda.

Replacing the front headlight bulbs of the Fiat Panda is a very simple operation that can be carried out independently, thanks to the help of this video tutorial that will explain step by step how to replace the bulbs and modify the voltage with an H4. To replace the headlight bulbs, we need to open the engine hood and remove the protective cap located behind the headlights. Then, we release the metal clip and remove the headlight together with the connector. We disconnect the connector and replace the bulb. Once the job is done, we start reassembling everything and close the engine compartment.


Posted on 28 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2012-2023 - Why don't the low beams on the Fiat Panda work anymore? Read Answer
    • Panda 2003-2012 - How to adjust the headlights in height in the Fiat Panda? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos